Extrusion is the process by which long straight metal parts can be produced. The cross-sections that can be produced vary from solid round, rectangular, to L shapes, T shapes. Tubes and many other different types. Extrusion is done by squeezing metal in a closed cavity through a tool, known as a die using either a mechanical or hydraulic press.
Extrusion produces compressive and shear forces in the stock. No tensile is produced, which makes high deformation possible without tearing the metal. The cavity in which the raw material is contained is lined with a wear resistant material. This can withstand the high radial loads that are created when the material is pushed the die.
Some of the Categories under EXTRUSION include POST GUSSET ADJUSTERS, GUSSET BOARDS, COPPER MESH, DIE SOAP & SCRAPPERS, SILICONE LUBRICANTS, WEB TRACKING TAPE, and TREATER SLEEVE.
Some of Our products that can be used for Extrusion include Post Gusset Adjuster Assembly, Hopper Grid Magnets N06W06LC, Die Soap – case (12 bars) Die Soap – 12 bars/case; Main Ingredients, 1 1/4″ Brass Scraper Non-corrosive, non-magnetic For cleaning, 3″ Brass Scraper Non-corrosive, non-magnetic For cleaning die, Dow Corning 7 Compound, Dow Corning 7 Compound – 1 gallon, Dow Corning 732 Multipurpose Sealant, Mold Release Spray and many more